document number: 93565 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 25-may-07 1 three phase bridge power modules 26mt../36mt..series vishay high power products description a range of extremely compact, encapsulated three phase bridge rectifiers offering effici ent and reliable operation. they are intended for use in general purpose and instrumentation applications. features ? universal, 3 way terminals: push-on, wrap around or solder ? high thermal conductivity package, electrically insulated case ? center hole fixing ? excellent power/volume ratio ? ul e300359 approved ? gold plated terminals solderable using lead (pb)-free solder; solder alloy sn/ag/cu (sac305); solder temperature 260 to 275 c ? rohs compliant ? designed and qualified for industrial and consumer level electrical specifications d-34a rohs compliant major ratings and characteristics parameter 26mt 36mt units i o 25 35 a at t c 70 60 c i fsm at 50 hz 360 475 a at 60 hz 375 500 i 2 t at 50 hz 635 1130 a 2 s at 60 hz 580 1030 v rrm 100 to 1600 v t j - 55 to 150 c voltage ratings type number voltage code v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm maximum at t j maximum ma 26mt../36mt.. 10 100 150 2 20 200 275 40 400 500 60 600 725 80 800 900 100 1000 1100 120 1200 1300 140 1400 1500 160 1600 1700
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93565 2 revision: 25-may-07 26mt../36mt..series vishay high power products three phase bridge power modules forward conduction parameter symbol test conditions 26mt 36mt units maximum dc output current at t c i o 120 rect. conduction angle 25 35 a 70 60 c maximum peak, one-cycle non-repetitive forward current initial t j = t j maximum i fsm t = 10 ms no voltage reapplied initial t j = t j maximum 360 475 a t = 8.3 ms 375 500 t = 10 ms 100 % v rrm reapplied 300 400 t = 8.3 ms 314 420 maximum i 2 t for fusing initial t j = t j maximum i 2 t t = 10 ms no voltage reapplied 635 1130 a 2 s t = 8.3 ms 580 1030 t = 10 ms 100 % v rrm reapplied 450 800 t = 8.3 ms 410 730 maximum i 2 t for fusing i 2 ti 2 t for time t x = i 2 t x t x ; 0.1 t x 10 ms, v rrm = 0 v 6360 11 300 a 2 s low-level of threshold voltage v f(to)1 (16.7 % x x i f(av) < i < x i f(av) ), at t j maximum 0.88 0.86 v high-level of threshold voltage v f(to)2 ( i > x i f(av) ), at t j maximum 1.13 1.03 low-level forward slope resistance r t1 (16.7 % x x i f(av) < i < x i f(av) ), at t j maximum 7.9 6.3 m high-level forward slope resistance r t2 ( i > x i f(av) ), at t j maximum 5.2 5.0 maximum forward voltage drop v fm t j = 25 c, i fm = 40 apk - per single junction 1.26 1.19 v maximum dc reverse current i rrm t j = 25 c, per junction at rated v rrm 100 a rms isolation voltage v ins t j = 25 c, all terminal shorted; f = 50 hz, t = 1 s 2700 v thermal and mechanical specifications parameter symbol test conditions 26mt 36mt units maximum junction temperature range t j - 55 to 150 c maximum storage temperature range t stg - 55 to 150 maximum thermal resistance, junction to case r thjc dc operation per bridge (based on total power loss of bridge) 1.42 1.35 k/w maximum thermal resistance, case to heatsink r thcs mounting surface, smooth, flat and greased 0.2 0.2 approximate weight 20 g mounting torque 10 % bridge to heatsink with screw m4 2.0 nm
document number: 93565 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 25-may-07 3 26mt../36mt..series three phase bridge power modules vishay high power products ordering information table outline dimensions in millimeters (inches) 13 2 36 mt 160 26 = 25 a (avg) 36 = 35 a (avg) 1 - current rating code: 2 - basic part number 3 - voltage code (code x 10 = v rrm ) device code n ot to scale 6.3 x 0. 8 (0.25 x 0.03) 10 (0.39) 23 (0.90) 21 (0. 8 3) 25.3 (0.99) max. 2 8 .5 (1.12) 16 (0.63) 5.2 (0.20) s u ggested pl u gging force: 400 n maxim u m; axially applied to faston terminals ~ ~ ~
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93565 4 revision: 25-may-07 26mt../36mt..series vishay high power products three phase bridge power modules fig. 1 - current ratings characteristics f ig. 2 - forward voltage drop characteristics fig. 3 - total power loss characteristics fig. 4 - maximum non-repetitive surge current fig. 5 - maximum non-repetitive surge current 030 maximum allowable case temperature (c) total output current (a) 5 101520 60 8 0 100 120 140 160 26mt.. series 120 (rect.) 25 ~ + - 1 1.0 1.5 2.0 2.5 3.0 3.5 4.0 10 1000 instantaneous forward current (a) instantaneous forward volta g e (v) 26mt.. series t j = 25 c t j = 150 c per j u nction 100 0 0.5 0 5 10 20 25 total output current (a) maximum total power loss (w) 0 10 20 30 40 55 26mt.. series t j = 150 c 50 45 35 25 15 5 120 (rect.) 0 25 50 100 150 maximum allowable ambient temperature (c) maximum total power loss (w) 0 10 20 30 40 55 50 45 35 25 15 5 1 k/ w 75 125 10 k/ w 7 k/ w 5 k/ w 4 k/ w 3 k/ w 2 k/ w r thsa = 0.7 k/ w - r 1 10 100 number of equal amplitude half cycle current pulses (n) peak half sine wave forward current (a) 8 0 120 160 200 240 2 8 0 300 320 at any rated load condition and w ith rated v rrm applied follo w ing s u rge. at 60 hz 0.00 8 3 s at 50 hz 0.0100 s initial t j = 150 c 26mt.. series 260 220 1 8 0 140 100 0.01 0.1 1 pulse drain duration (s) peak half sine wave forward current (a) 8 0 120 160 200 240 320 360 400 maxim u m non repetiti v e s u rge c u rrent v ers u s p u lse train d u ration. n o v oltage reapplied rated v rrm reapplied initial t j = 150 c 26mt.. series 2 8 0
document number: 93565 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 25-may-07 5 26mt../36mt..series three phase bridge power modules vishay high power products fig. 6 - current ratings characteristics f ig. 7 - forward voltage drop characteristics fig. 8 total power loss characteristics fig. 9 - maximum non-repetitive surge current fig. 10 - maximum non-repetitive surge current 040 maximum allowable case temperature (c) total output current (a) 5 10 15 25 50 70 90 110 130 150 36mt.. series 120 (rect.) 35 20 30 ~ + - 1 1.0 1.5 2.0 2.5 3.0 3.5 4.0 10 1000 instantaneous forward current (a) instantaneous forward volta g e (v) 36mt.. series t j = 25 c t j = 150 c per j u nction 100 0 0.5 0 5 15 25 35 total output current (a) maximum total power loss (w) 0 10 20 40 60 8 0 70 50 30 120 (rect.) 10 20 30 36mt.. series t j = 150 c 0 25 50 100 150 maximum allowable ambient temperature (c) maximum total power loss (w) 0 10 20 30 50 8 0 70 60 40 1 k/ w 75 125 10 k/ w 7 k/ w 5 k/ w 4 k/ w 3 k/ w 2 k/ w r thsa = 0.7 k/ w - r 1 10 100 number of equal amplitude half cycle current pulses (n) peak half sine wave forward current (a) 100 200 300 400 450 at any rated load condition and w ith rated v rrm applied follo w ing s u rge. at 60 hz 0.00 8 3 s at 50 hz 0.0100 s initial t j = 150 c 36mt.. series 350 250 150 0.01 0.1 1 pulse drain duration (s) peak half sine wave forward current (a) 100 150 200 250 300 400 450 500 maxim u m non repetiti v e s u rge c u rrent v ers u s p u lse train d u ration. n o v oltage reapplied rated v rrm reapplied initial t j = 150 c 36mt.. series 350
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93565 6 revision: 25-may-07 26mt../36mt..series vishay high power products three phase bridge power modules fig. 11 - thermal impedance z thjc characteristics fig. 12 thermal impedance z thjc characteristics 0.01 0.1 1 10 0.001 0.01 0.1 1 10 square wave pulse duration (s) z thjc - transient thermal impedance (k/w) 26mt.. series per b ridge . . 100 0.001 steady state v al u e: r thjc = 1.42 k/ w (dc operation) 0.01 0.1 1 10 0.001 0.01 0.1 1 10 square wave pulse duration (s) z thjc - transient thermal impedance (k/w) 36mt.. series per b ridge . . 100 0.001 steady state v al u e: r thjc = 1.35 k/ w (dc operation)
legal disclaimer notice vishay document number: 99901 www.vishay.com revision: 12-mar-07 1 notice the products described herein were acquired by vishay intertechnology, inc., as part of its acquisition of international rectifier?s power control systems (pcs) business, which closed in april 2007. specifications of the products displayed herein are pending review by vishay and are subject to the terms and conditions shown below. specifications of the products displayed herein are subject to change without notice. vishay intertechnology, inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale. international rectifier ? , ir ? , the ir logo, hexfet ? , hexsense ? , hexdip ? , dol ? , intero ? , and powirtrain ? are registered trademarks of international rectifier corporation in the u.s. and other countries. all other product names noted herein may be trademarks of their respective owners.
|
